Thank you Gabriel. I probably need help loading the OS via USB. I am using zTerm. I have both the OCT_OS_v16200.elf and the OCT_OS_v160.elf files. I am following the instructions on the "OS Udate via USB" pdf. I am able to get communication with the Octopus, but when I try to send the new OS file to the Octopus, I get this message:
### Send (Y) OCT_OS_v16200.elf: Cancelled
Unrecognized image type: 0x434f1100
xyzModem – CRC mode, 1(SOH)/1(STX)/0(CAN) packets, 7 retries
I must be doing something wrong.
I don’t know if it helps, but this is the flash contents list when I issue a "fis list" command:
fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0x01800000 0x01800000 0x00020000 0x00000000
OCT_OS.elf 0x01820000 0x00010000 0x00070000 0x00010040
FIS directory 0x019F0000 0x019F0000 0x0000F800 0x00000000
RedBoot config 0x019FF800 0x019FF800 0x00000800 0x00000000
Octopus>
Thank you,
Barry
Post edited by: Oxix52, at: 2009/08/06 19:55