Are you using the OCT_162_jk03.elf, with a file size of 304,848 bytes? Be sure your copy of the file is good.
Do you have your terminal program set to send the .elf file in binary format? Look in the settings menu and be sure "binary" is checked. That has been a problem for some people.
Let me know if anything gets better!
load -m ymodem -b 0x00010000
### Send (Y) OCT 162.elf: Cancelled
Entry point: 0x00010040, address range: 0x00010000-0x00051e5c
xyzModem – CRC mode, 1(SOH)/296(STX)/0(CAN) packets, 3 retries
Octopus> fis create -b 0x00010000 -l 0x00070000 -f 0x01820000 OCT_OS.elf
An image named ‘OCT_OS.elf’ exists – continue (y/n)? y
… Erase from 0x01820000-0x01890000: …….
… Program from 0x00010000-0x00080000 at 0x01820000: …….
… Erase from 0x019f0000-0x01a00000: .
… Program from 0x001f0000-0x00200000 at 0x019f0000: .
Octopus> and then i i try to hold CLR button of octopus and reset (red button) and the next messege is .
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN – built 04:27:46, Mar 12 2005
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x00000000-0x00200000, [0x0000cfa0-0x001ee800] available
FLASH: 0x01800000 – 0x1a00000, 32 blocks of 0x00010000 bytes each.
Adapted by genoQs Machines in 2006 as Octopus boot loader.
== Executing boot script in 1.000 seconds – enter ^C to abort
Octopus> fis load OCT_OS.elf
Not a loadable image – try using -b ADDRESS option
No entry point known – aborted
and the octopus stay dead
help plz. sorry for noob